/*

Echo CS-330t review

brand new echo CS-330t-spc arborist climb saw. this thing has good power and fires up on the first pull when it’s all wramed up. takes about 3 pulls when it’s cold to get it to fire the 2 pulls and it starts right up. :)
Video Rating: 3 / 5

10 Responses to “Echo CS-330t review”

  • joshuarugg:

    @TheRob916 my saw did the same thing before i took out the spark screen and the metal plate under that. you need to rip out the red limiter caps in the carb and tune it way richer then they have it set. you turn the screw out counter clock wise until it runs rough like its about to shut off then turn in the idle until its back up to proper idle. repeat this process like 2-3 times. thats what i did and she cuts great! hoe this helps. ps. once you do this mod, the factory 5 year warranty is void.

  • joshuarugg:

    @TheRob916 yess they should cover it as long as you didn’t remove the limiter caps. bring it in and let the echo dealer know whats going on. dont take it back to home cheapo. bring it to a certified echo dealer. look for a specialty store.

  • TheRob916:

    does echo warranty cover tuning?,,, we got a 330T from home depot it ran fine until the second day, it bogs down then revs, sometimes it will shut off, I played with the H L settings on the carb but it still takes a second or two to rev up, I personally got the 310 and its been kicking ass, Ive been using the 310 14inch stock to cut HUGE oak in pieces to split, im talkin 28 inch logs with the same chain not even had to sharpen it yet!! were kinda disapointed on the 330T but still have hope…

  • MrBigwilly88:

    I’ll let the pros do it, thanks for the info man. The dealer I bought it from won’t touch it but have a different Echo dealer close by who will. Also may have him change out chain. And ROB916 my cs360t out cut a Husqvarna t 435 today stock with safety chain and first tank of fuel. The t 435 is a chinese made red max re-badged.

  • joshuarugg:

    @MrBigwilly88 yess counter clockwise is rich, clockwise is lean. if you dont know how to tune a carb dont mess with it. you might not like the results. it takes practice and a good ear to hear when its tuned.

    with this saw i tuned the L screw richer and turned the idle up as the idle revs tend to go down when you tune the L screw richer. then tune the H screw so it 4 strokes at high speed. good luck

  • joshuarugg:

    @TheRob916 in my opinion the echo is better then the low end husqy. they certainly do not compare to the high end husqys but they blow the low ends and even the stihl 192 out of the water. that is after you take the catalytic converter and spark screen off and retune the carb richer.

  • TheRob916:

    right on good vid, cuzn jus got the exact one tday, i was thinkin bout the husq, $250 one, wuchu think?

  • MrBigwilly88:

    Hey man new to this game just got a new cs360t when you say ajust screws out ani in i’m guessing left is out and right in in correct? I Know stoopid question LOL.

  • ontarioclimber:

    ha ha ha, see you already did that, well done dude :)

  • ontarioclimber:

    nice Josh, take the arrester and screen off and it will run a lot faster

Leave a Reply

*/